Monthly Archives: March 2016

Work continues on SR 169 safety improvement project this week

Posted on by

Drivers traveling on State Route 169 next week will need to allow additional time to reach their destination as crews continue work on the safety improvement project. Starting on Tuesday and Thursday crews will move temporary concrete barrier and repave the existing roadway between milepost nine and 10.

Work hours are from 7 a.m. to 3:30 p.m. each day. Drivers will be guided through the work zone with a pilot car in alternating directions; delays of up to 15 minutes are expected.

ADOT advises drivers to proceed through the work zone with caution, slow down, and be alert for construction equipment and personnel. The speed limit through the work zone will be 45 mph.

ADOT works to inform the public about planned highway restrictions, but there is a possibility that unscheduled closures or restrictions may occur. Weather can also affect a project schedule. To stay up-to-date with the latest highway conditions around the state, visit the ADOT Traveler Information Center at www.az511.gov or call 5-1-1.

This $1.6 million safety improvement project includes widening the existing roadway to provide new turn lanes, drainage improvements, signing and new striping.

Student archers taking aim at 2016 state tournament

Posted on by

Archery_in_Schools_-_2_1PHOENIX — More than 320 student archers from throughout Arizona, participants on the state level of the National Archery in the Schools Program (NASP), will be competing Saturday in the 2016 state tournament and 3D shoot at the Ben Avery Shooting Facility.

The Arizona Game and Fish Department coordinates NASP on the state level and hosts a half-dozen state qualifying tournaments throughout the academic year, beginning in September and ending in March. The top three boys and girls competing in the bullseye and 3D events in three divisions — elementary, middle and high school — will be awarded.

The student archers also will be attempting to qualify for the 2016 national NASP tournament, scheduled for May 12-14 in Louisville, Ky.

The competition will take place from 8 a.m. to 2 p.m. on the FITA and FITA practice ranges. Admission is free. Several local outdoors organizations, as well as a food truck, will be on-site.

The program is a physical education curriculum designed to teach international-style target archery for students in grades 4 through 12. The core content covers safety, techniques, equipment, mental concentration, and self-improvement, as well as the history of the sport.

It’s also about having fun. Kelsey Gerchar, the department’s archery education coordinator, said there has been tremendous interest in the NASP/IBO 3D Challenge, where students take shots at six different foam animal targets placed at various distances, then rotate to take shots at each of the remaining targets.

“This interest has led to the introduction of a new NASP bowhunting program the department will be rolling out at the end of the year,” Gerchar said.

Arizona’s Archery in the Schools program is funded through an excise tax on the sale of hunting and shooting sports equipment. No state general funds are used to support the program. Game and Fish administers the program for the purpose of promoting safe, responsible aspects of the sport, as well as wildlife conservation as part of the Wildlife and Sport Fish Restoration Act (WSFR). Visit www.azgfd.gov/archery for more information.

Stop and Buy on Route 66 in Ash Fork

Posted on by

stop-n-buy-01Ash Fork — If you are traveling west on Interstate 40, you might want to make a stop in Ash Fork and shop at the roadside emporium known as the Stop and Buy on Route 66.

Gary is a well-know purveyor of knives, stun guns, ladies bags and other specialized items in the Williams area. He has established his roadside business now in the Flagstone Capitol of the World, Ash Fork, right on historic Route 66.
stop-n-buy-02
He has added some great metal signs and license plates made not just in the USA, but right here in Arizona. They are beautifully made.
stop-n-buy-03
He has added some great knives to his line including the famous Ka-Bar. The advantage of his roadside lease is he can offer great prices. He also carries handbags and magnetic bracelets. He is getting ready to order flags which is another of his popular items.

Of course visiting Gary is a not the only reason to stop in Ash Fork. Lulu Belle’s BBQ restaurant which has been open for about a year is becoming a popular dining spot. The Ash Fork Route 66 museum offers a great view of the history of the area which includes photos and dioramas.

Williams Charity Shop open in mall

Posted on by

charity-shop-1WILLIAMS — If you are a thrift shopper, visit the Williams Charity Store location in the mall at 117 W. Route 66.

For about a year, now, Patty has run the thrift book store to benefit the efforts of the R&R Horse Rescue mission near Williams. Recently she has expanded the thrift store into another suite to benefit other charities in Williams.
charity-shop-2
While the book store still benefits the R&R Horse Rescue, the other section of the thrift store benefits various charities in Williams each month. For example one month might benefit the Senior Graduation night effort and the next month another Williams charity.
charity-shop-3
For more information you can check with Patty Williams at the Williams Western Wear and Buck’s Place located at the first suite to the right as you enter the mall. While you are there you can ask Buck to test your quick draw.charity-shop-4

Coconino Amateur Radio Club holding classes for upcoming exam

Posted on by

Update 3/19/2016 8:28 p.m.: Classes begin at 9 a.m. on Saturday and run until the class is complete.
final logoFLAGSTAFF — The Coconino Amateur Radio Club of Flagstaff is currently holding classes for the technician class license. The classes are free and open to anyone of any age. The classes are held every Saturday from 8 am to 12 pm. They are held at the North Country Health Care facility at 2920 N 4th Street in Flagstaff.

The technician class license is the first FCC license a person can obtain to operate amateur radio equipment. You must get 26 questions correct on a 35 question examination. The examination fee is $15 and the next test is on April 16. Although anyone can come to the exam and classes, the Coconino Amateur Radio Club requests that you go to their web site and let them know that you are coming so they can provide enough material.

If you pass the examination for a Technician license, you can take the test for the General Class license. This allows you access to more frequencies and privileges. If you pass that exam, you can try for the top license; Amateur Extra. If you fail any exam along the way, you will be required to pay another $15 to retake the examination.

The courses are based on The ARRL Ham Radio License Manual. The manual is available through the Amateur Radio Relay League and other online retailers for around $25. Some may be on hand at the class.

The rest of the course schedule is as follows:

  • March 19 – Chapter 3 – Electronic components, Types of Radio Circuits
  • April 2 – Chapter 4 – Radio Wave Propagation, Antennas and Feed Lines, Practical Antenna Systems
  • April 9 – Chapter 5 – Basic Amateur Radio Equipment, Power Sources and Interference
  • April 16 – Chapter 6 – Communicating with Other Hams
  • April 23 – Chapter 7 & 8 – License Regulations and License Privileges, Call Signs and Operating Regulations (Part 1)
  • April 30 – Chapter 8 & 9 – Call Signs and Operating Regulations (Part 2), Safety and Amateur Radio

In order to take the test, you must bring a picture identification and your social security number. If you do not desire to give your social security number, you can file for an FCC Registration Number (FRN) at the FCC Universal Licensing web site. If you provide your SSN, you will be issued an FRN and listed on the ULS anyway. The benefit of signing up for an FRN before the examination is that you may get your license quicker.

If you pass any level of examination, the Volunteer Examiners take all necessary steps to file for your license. You can download your license as soon as it appears in the FCC database and start operating on Ham frequencies.

Final paving scheduled on US 93 north of Wickenburg

Posted on by

Drivers traveling on US 93 north of Wickenburg (mileposts 185 to 190) should allow extra travel time for the next two weeks starting Monday (March 21) through Thursday (March 31) as crews prepare for final paving on the project.

Traffic will be guided through the work zone by pilot cars and minimal delays are expected between 4:30 a.m. and 5 p.m. Monday through Thursday each week. Speed will be reduced through the work zone.

As part of the final paving, crews will mill some of the existing pavement on the northbound lanes and drivers will be on rough road conditions until final paving is complete.

ADOT began this expansion project in February to widen US 93 between State Route 71 and State Route 89 which included the reconstruction of the highway into four lanes. This work will complete the widening project.

The work zone will be clearly marked by temporary barricades and signage. ADOT advises drivers to allow additional time to reach their destinations, and to proceed through the work zone with caution and comply with the reduced speed limit.

No time like the present to prepare watercraft for boating season

Posted on by

PHOENIX — The official start of the boating season is on the horizon and many Arizonans are getting ready to pull their favorite watercraft out from storage in preparation for more fun on the water.

To ensure the season is hiccup-free, the Arizona Game and Fish Department recommends that all watercraft owners thoroughly inspect their vessel to help prevent problems that could keep them off the water. To ensure you encounter only smooth sailing, watercraft owners should conduct the following inspections:

  1. Fuel system – Check the system for any leaks or damages. Give special attention to any fuel lines and connections. Damaged fuel hoses could either be cracked, brittle or soft. Also ensure the engine exhaust and ventilation systems are functioning properly. Before starting your engine, open the engine cover and smell for the presence of fuel vapor. Leave the engine cover off when first starting so you can inspect for proper functioning of the engine.
  2. Belts, cables and hoses – As with fuel lines, inspect all belts, cables and hoses that may have been damaged while in storage. Inactive items can become brittle and may crack. Ensure belts are fitted tightly and that there are no cracks on the outer jacket of the throttle, shift and steering control cables.
  3. Electric system – Inspect all electrical connections to ensure they are clean, tight and corrosion free. All electrical systems should be regularly inspected by a qualified technician.
  4. Fluid levels – Check all fluid levels including engine oil, power steering, power trim reservoirs and engine coolant. Also be sure to change the engine oil, oil filter and drive lubricants.
  5. Propellers and hulls – Ensure propellers are free of dings, pitting, cracks and distortion, and that they are secured properly. On the hull, inspect for blisters, distortions and cracks. Also make sure the vessel’s drain plug is in place before launching.
  6. Safety gear – Check to ensure all life jackets are still in good condition, that they are the right size and fit for your passengers. On average in Arizona, life jackets should be replaced every three to five years. Remember that state law requires anyone 12 and under must wear a life jacket at all times when the vessel is underway and there should be one life jacket aboard for every passenger.

    Don’t forget that a throwable flotation device – usually a cushion with handles or a ring buoy – is required for all watercraft longer than 16 feet, except for canoes and kayaks. Also check to ensure the fire extinguisher is fully charged and stowed in the proper location.
  7. Take a safety course – The department offers free courses in Phoenix and Lake Havasu City every month to provide water users the information and tips needed to stay safe while on the water. For more information on boating safety or to register for a hands-on or online safety course, visit www.azgfd.gov/boating and click “Boating Safety Education.”

 

Pavement work scheduled on US 60 in Wickenburg for next two weeks

Posted on by

This week, crews will be sealing cracks in the pavement on US 60 during the day (mileposts 111-113) through Thursday (March 17) between 7 a.m. and 3 p.m. each day. Drivers can expect minimal delays through the work zone.

Starting Sunday (March 20), crews will seal cracks in the pavement in the same area, but will do the work overnight to minimize impacts to traffic and business access. Work hours at night will be 7 p.m. to 5 a.m. through Thursday morning (March 23).

Motorists should expect some delays and should allow extra time to reach their destinations.

Gilbert man catches state record for native roundtail chub

Posted on by

AGF Photo

General area of the Verde River where Rudolph Hoffman caught his state record catch-and-release roundtail chub.

CLARKDALE — It’s the native fish with a sporting fight. On Feb. 13 on the Verde River above Clarkdale, Rudolph Hoffman of Gilbert found a large pool of water and began cranking in multiple roundtail chub. The first measured at about 17 inches. Then another at 18 … then 18 1/2 inches …

Typically, the length of a roundtail chub is 8 to 18 inches, weight is 4 ounces to more than 3 pounds, and they potentially reach 8 years of age. George Andrejko/AZGFD

Typically, the length of a roundtail chub is 8 to 18 inches, weight is 4 ounces to more than 3 pounds, and they potentially reach 8 years of age. George Andrejko/AZGFD

Finally, a 19-inch chub took a 1/4-ounce bronze spoon with a spinning rod and 8-pound fluorocarbon line. This Gila robusta set a state catch-and-release record for roundtail chub. (Topping Dave Wagner’s 16-inch roundtail caught 2011, also on the Verde).

“There is really something special about being able to catch and release a fish that has been part of our Arizona waterways for tens of thousands of years,” Hoffman said.

The Department has initiated numerous conservation efforts since the early 2000s. Maintenance of healthy roundtail chub populations were likely influenced by all of these conservation measures in the Verde River.

AZGFD biologists prepare to stock chub. George Andrejko/AZGFD

AZGFD biologists prepare to stock chub. George Andrejko/AZGFD

By 2008, several flood events and conditions aligned to boost their populations. A few high-flow years helped young chub to survive. Conservation efforts by the Salt River Project’s Habitat Conservation Program and the Department have led to healthy populations of chub in the Verde River and across the state. These efforts included the development of a brood stock of chub to be raised at the Bubbling Ponds Hatchery, near Cornville, Ariz., and a stocking strategy to enhance wild populations of chub in the Verde River.

There also are special fishing regulations for the Verde River and its tributaries that likely have benefitted the chub — it’s all catch and release, and downstream from Granite Creek to Horseshoe Dam, anglers can enjoy unlimited daily bag limits for smallmouth and largemouth bass, and channel and flathead catfish.

So why not chase some of these Arizona natives during your next fishing trip?

“These chub fight better than smallmouth,” said Matt Chmiel, Aquatics Program Manager in the AZGFD Kingman office. “I’ve caught both and every one of the chub fought better than the smallmouth. Fishing from a canoe one time I had three chub break me off on 4-pound line.”

Transcon Lane South of Interstate 40 (Winslow) to undergo improvements beginning tomorrow

Posted on by

The Arizona Department of Transportation (ADOT) is administering improvements on behalf of the City of Winslow to Transcon Lane between Interstate 40 and the travel plaza (truck stop) beginning Wednesday morning. Construction will occur during daylight hours, Monday through Friday. No weekend or holiday construction is anticipated; however traffic restrictions will be in place continuously until project completion late July, 2016.

Travel through Transcon Lane and access to the travel plaza will be available at all times.

ADOT advises drivers to proceed through the work zone with caution, obey posted speed limits and be alert for construction equipment and personnel.