FDA Designates Medtronic Worldwide Voluntary Field Action on HVAD(TM) System Controllers and DC Adapters as Class I Recall

Medtronic plc (NYSE: MDT) announced today that the U.S. Food and Drug Administration (FDA) has classified the company’s recently initiated voluntary field action related to its HVAD(TM) System Controllers (serial numbers lower than CON300000) and DC Adapters (all serial numbers for product code 1435) as a Class I recall.

Medtronic began notifying clinicians outside of the United States in March 2017 about updated HVAD System Controllers and DC Adapters that were developed following two previously communicated Field Safety Notices that occurred in April 2015 and April 2016. The FDA approved the updated controller on April 7, 2017, and Medtronic began notifying U.S. clinicians about the updated HVAD Controllers and DC Adapters on April 14, 2017.

The updated controller includes enhancements designed to address the potential safety issues identified in the previously communicated notices, including:

  • strengthened power and serial port alignment guides intended to reduce the incidence of wear that could lead to damaged connector pins;
  • functionality designed to monitor internal battery performance and sound an alert when the internal battery is nearing depletion; and
  • redesigned connectors and housing intended to prevent the risk of connectors loosening or becoming more vulnerable to damage from exposure to water and other fluids.

In addition, the updated controller introduces upgraded internal circuitry designed to improve overall device reliability.

In April 2015 and April 2016, Medtronic notified clinicians about potential safety issues with the current HVAD System Controller that could lead to possible injury and death due to worn alignment guides, internal “double disconnect (no power) alarm” battery failure, and loose power and data connectors.

With the introduction of the updated controller, Medtronic has begun to remove current HVAD Controllers (product codes 1400,1401US and 1407US) in select geographies, including the U.S. Medtronic also has begun to remove the related adapters (product code 1435), Instructions for Use, Patient Manuals and Emergency Responder Guides.

As part of these activities, Medtronic has provided the following recommendations to physicians:

  • Before the updated controller will be distributed to hospitals, clinicians must complete required training on the updated controller and updated product labeling, including the Instructions for Use and Patient Manual.
  • Following training and the receipt of the updated controllers in hospital inventory, clinicians are requested to quarantine and replace patients’ primary and backup HVAD Controllers and DC adapters under clinical supervision and at a hospital where patient support equipment is available.
  • While Medtronic recommends that HVAD Controllers be exchanged, clinicians should weigh the benefits of the updated controller against the risks of a controller exchange procedure.
  • When clinicians determine a controller exchange is appropriate, they will notify patients who should promptly schedule a controller exchange as soon as the updated controllers are available.
  • Trained hospital staff must educate patients on using the updated controller.

Patients with questions about this announcement should contact their physicians or ventricular assist device (VAD) coordinator at their hospital center.

Adverse reactions or quality problems experienced with the use of this device may be reported to the FDA’s MedWatch Adverse Event Reporting program either online, by regular mail or by fax:

For information or to report a problem, please contact the 24-hour Clinical Support line at +1-888-494-6365 or email FSCA@medtronic.com.

Medtronic Announces Voluntary Worldwide Recall of its Stratamr Adjustable Valves and Shunts

DUBLIN – Medtronic plc today announced that on February 22, 2017 it notified customers of a voluntary recall of all unused units of the StrataMR™ adjustable valves and shunts. These products are manufactured and marketed by Medtronic’s Neurosurgery business, which is part of the Brain Therapies division of the company’s Restorative Therapies Group. This recall only applies to StrataMR adjustable valves and shunts and does not apply to Strata™ II or Strata™ NSC products.

As of the initiation of this recall, 2,622 StrataMR valves and shunts potentially affected by this recall had been distributed worldwide. The affected StrataMR valves and shunts were manufactured from October 27, 2015 to November 11, 2016. Medtronic initiated the recall due to an increase in the product complaint rate. As of April 1, 2017, the product complaint rate related to this issue was 2.75 percent of total units distributed.Medtronic StrataMR adjustable valves and shunts are used in the management of hydrocephalus. They control the flow of cerebrospinal fluid being drained from the brain to relieve intracranial pressure. Medtronic is conducting this voluntary recall due to an issue that can occur post-implantation that can lead to the potential for under-drainage of cerebrospinal fluid.

Under-drainage of cerebrospinal fluid may result in the following adverse health consequences: headaches, nausea, vomiting and lethargy.

  • If any of the affected products have been implanted in patients, physicians should refer to the StrataMR customer recall letter sent February 22, 2017 as well as the valve adjustment instructions in the instructions for use (IFU) for continued patient care.
  • Patients and their caregivers should monitor the patient’s condition and if they find they are experiencing any of the above-mentioned symptoms, they should consult the physician who implanted the StrataMR valve.

If left untreated, under-drainage can potentially lead to coma and death. There has been one reported patient death, but the cause of death has not been confirmed to be related to this issue.

Medtronic initiated customer communication of the recall by letter and is requesting that customers cease use of all affected product that remains in inventory and return all unused units to Medtronic. The U.S. Food and Drug Administration (FDA) and other regulatory bodies also have been notified.

Adverse reactions or quality problems experienced with the use of this product may be reported to the FDA’s MedWatch Adverse Event Reporting program online, by regular mail, or by fax.

Mylan Provides Update on Meridian Medical Technologies’, a Pfizer Company, Expanded Voluntary Worldwide Recall of EpiPen® Auto-Injector

Mylan N.V. today announced that Meridian Medical Technologies, a Pfizer company and Mylan’s manufacturing partner for EpiPen® Auto-Injector, has expanded a voluntary recall of select lots of EpiPen (epinephrine injection, USP) and EpiPen Jr® (epinephrine injection, USP) Auto-Injectors to now include additional lots distributed in the U.S. and other markets in consultation with the U.S. Food and Drug Administration (FDA).

This recall is being conducted as a result of the receipt of two previously disclosed reports outside of the U.S. of failure to activate the device due to a potential defect in a supplier component. The potential defect could make the device difficult to activate in an emergency (failure to activate or increased force needed to activate) and have significant health consequences for a patient experiencing a life-threatening allergic reaction (anaphylaxis). Both reports are related to the single lot that was previously recalled. The incidence of the defect is extremely rare and testing and analysis across the potentially impacted lots has not identified any units with a defect. However, the recall is being expanded to include additional lots as a precautionary measure out of an abundance of caution.

The recalled product was manufactured by Meridian Medical Technologies, a Pfizer company, and distributed by Mylan Specialty between December 2015 and July 2016. The expanded voluntary recall is being initiated in the U.S. and also will extend to additional markets in Europe, Asia, North and South America.

The recall impacts the 0.3 mg and 0.15 mg strengths of EpiPen Auto-Injector. None of the recalled lots include the authorized generic for EpiPen Auto-Injector, which is also manufactured by Meridian Medical Technologies.

U.S. Impacted Lots:

Product/Dosage NDC Number Lot Number Expiration Date
EpiPen Jr 2-Pak® Auto-Injectors, 0.15 mg 49502-501-02 5GN767 April 2017
EpiPen Jr 2-Pak® Auto-Injectors, 0.15 mg 49502-501-02 5GN773 April 2017
EpiPen 2-Pak® Auto-Injectors, 0.3 mg 49502-500-02 5GM631 April 2017
EpiPen 2-Pak® Auto-Injectors, 0.3 mg 49502-500-02 5GM640 May 2017
EpiPen Jr 2-Pak® Auto-Injectors, 0.15 mg 49502-501-02 6GN215 September 2017
EpiPen 2-Pak® Auto-Injectors, 0.3 mg 49502-500-02 6GM082 September 2017
EpiPen 2-Pak® Auto-Injectors, 0.3 mg 49502-500-02 6GM072 September 2017
EpiPen 2-Pak® Auto-Injectors, 0.3 mg 49502-500-02 6GM081 September 2017
EpiPen 2-Pak® Auto-Injectors, 0.3 mg 49502-500-02 6GM088 October 2017
EpiPen 2-Pak® Auto-Injectors, 0.3 mg 49502-500-02 6GM199 October 2017
EpiPen 2-Pak® Auto-Injectors, 0.3 mg 49502-500-02 6GM091 October 2017
EpiPen 2-Pak® Auto-Injectors, 0.3 mg 49502-500-02 6GM198 October 2017
EpiPen 2-pak® Auto-Injectors, 0.3 mg 49502-500-02 6GM087 October 2017

Mylan is committed to replacing recalled devices at no cost and Mylan would like to reassure patients that there will be no additional replacement-related financial burden to them as a result of this recall. Patients, customers and distributors are being notified and should refer to Mylan.com/EpiPenRecall for updates on product return and replacement instructions. We are asking patients to keep their existing product until their replacement product can be secured.

Patients may receive either EpiPen Auto-Injector or the authorized generic for EpiPen Auto-Injector at the pharmacy as a replacement based on availability. The authorized generic has the exact same drug formulation, has the exact same operating instructions and is therapeutically equivalent to EpiPen Auto Injector, and may be substituted for EpiPen Auto Injector.

It is important that patients continue to carry their current EpiPen Auto-Injector until they receive a replacement device.

To return your product please contact Stericycle at 877-650-3494. If you have any additional questions regarding this recall, please contact Mylan Customer Relations at 800-796-9526 or customer.service@mylan.com.

Adverse reactions or quality problems experienced with the use of this product may be reported to the FDA’s MedWatch Adverse Event Reporting program either online, by regular mail or by fax.

This voluntary recall is being conducted with the knowledge of FDA.

Epinephrine is the first-line treatment for a life-threatening allergic reaction (anaphylaxis) and access to this product is critical in the event of an emergency. Delays in epinephrine administration have been associated with negative health consequences.

More information about the risks and benefits of EpiPen® Auto-Injector can be found at EpiPen.com.

Please see the full Prescribing Information and Patient Information.

Free seasonal flu shots available

FLAGSTAFF – The Coconino County Public Health Services District (CCPHSD) is offering free seasonal flu vaccinations.

The free flu vaccination clinics will be held on Friday, Feb. 24 from 8 am – 12 pm and 1 pm – 5 pm and Saturday, Feb. 25 from 9 am to 1 pm at the CCPHSD Clinic located at 2625 N. King St., Flagstaff. Appointments are available by call 928-679-7222 or toll-free at 1-877-679-7272. Walk-ins are welcome.

The Centers for Disease Control and Prevention (CDC) recommends that flu vaccination efforts continue throughout the flu season. According to the CDC, Flu activity can occur as late as May.

“Because flu activity can continue well into spring, it’s not too late to protect yourself from illness by getting a flu shot,” said Marie Peoples, CCPHSD Chief Health Officer.

“A yearly flu vaccination is the first and most important step in protecting against flu viruses.”

It is strongly recommended that everyone 6 months old and over get a flu shot each year. It’s especially important that the following groups get a flu vaccination either because they are at high risk of having serious flu-related complications or because they live with or care for people at high risk for developing flu-related complications, including:

· Pregnant women
· Children younger than 5, but especially children younger than 2
· People 50 years of age and older
· People of any age with certain chronic medical conditions
· People who live in nursing homes and other long-term care facilities
· People who live with or care for those at high risk for complications from flu, including:
· Health care workers
· Household contacts of persons at high risk for complications from the flu
· Household contacts and out of home caregivers of children less than 6 months of age (these children are too young to be vaccinated)

Flu symptoms include fever, chills, muscle aches, cough, congestion, runny nose, headaches and fatigue. Complications of flu can include bacterial pneumonia, ear infections, sinus infections, dehydration and worsening of chronic medical conditions, such as congestive heart failure, asthma, or diabetes and can cause death.

In addition to getting a seasonal flu shot, good health habits will help you stay well. These simple actions can stop the spread of germs and help protect you and others from getting sick:

· Wash your hands frequently during the flu season.
· Avoid touching your eyes, nose or mouth.
· Avoid contact with people who are sick.
· Cover your mouth with your upper sleeve or with a tissue when coughing or sneezing.
· Don’t share eating utensils, cups, and straws.
· Stay home when you are sick.

Additional information is available at www.coconino.az.gov/health. Contact your health care provider or call the Coconino County Public Health Services District Clinic at 928-679-7222 or toll-free at 1-877-679-7272.

Vascular Solutions, Inc. Issues Recall of Twin-Pass® Dual Access Catheters

On September 16, 2016, Vascular Solutions, Inc., initiated a nationwide recall of Twin-Pass Dual Access catheters used in catheterization procedures. All unexpired lots of the product have been recalled because there is a potential for excess manufacturing material to remain at the tip of the catheter or within the distal portion of the rapid exchange lumen. It is possible that the excess material may separate from the catheter during use and pose a potential risk of embolism, which could result in serious injury or death. No injuries have been reported in association with this issue to date.

Healthcare facilities that have the affected Twin-Pass dual access catheters should remove the products from their inventory and return them to Vascular Solutions.

The recalled products were manufactured from October 2014 to August 2016 and distributed from October 2014 to September 2016.

The recalled products are all unexpired lots of Model Numbers 5200, 5210, and 5230. A listing of the recalled lots is available from Vascular Solutions and has been provided to each facility that purchased the affected products. A total of 15,896 devices have been manufactured, with 5,784 distributed in the United States and currently unexpired. The condition that led to the recall may affect approximately 9.2% of recalled devices.

Vascular Solutions, Inc. voluntarily initiated the recall on September 16, 2016 through an Urgent Medical Device Recall notification distributed to purchasers of the affected products. The notification identified the specific unexpired lots subject to the recall and included instructions on how to return the affected products.

The U.S. Food and Drug Administration (FDA) classified this as a Class I recall. FDA defines Class I recalls as “a situation in which there is a reasonable probability that the use of, or exposure to, a violative product will cause serious adverse health consequences or death.”

Consumers with questions may contact the company by phone at 1-888-240-6001 Monday through Friday, between the hours of 8:00 a.m. and 5:00 p.m. Central Time or by email at customerservice@vasc.com. Adverse reactions or quality problems experienced with the use of this product may be reported to the FDA’s MedWatch Adverse Event Reporting program Online at http://www.fda.gov/medwatch/report.htm (form available to fax (1-800-FDA-0178) or mail), or you may call the FDA at 1-800-FDA-1088 to request a reporting form.

Honeywell recalls one lot of Eyesaline Eyewash Solution

In cooperation with the U.S. Food and Drug Administration (FDA), Honeywell is voluntarily recalling one production lot of 32-ounce bottles of Eyesaline Eyewash solution, which is used for emergency eye rinsing after an injury.

Although no injuries have been reported and we have not found any contamination in our batch testing, the voluntary recall is a precautionary measure due to a low risk of product contamination with Klebsiella pneumoniae. Although found in the normal flora of the mouth and skin, if the contaminant were present in a bottle, there is a potential for it to result in infections that may be sight-threatening.

Eyesaline Eyewash is sold through industrial sales distributors. Approximately 9,700 32-ounce bottles with lot number F16091-61 are subject to recall. No other lot number of the product is subject to this recall.

All of Honeywell’s distributors who received this lot have been notified by phone, e-mail and certified mail, and have been instructed to notify their customers. See instructions below on how to find the lot number to determine if your supply is covered by this voluntary recall.

Distributors must stop distribution of the affected product and return it to Honeywell for credit or replacement.  Commercial-industrial users of the product should also check whether their Eyesaline Eyewash is subject to recall. If it is, customers should stop using the solution and contact their distributor for replacement or credit.
ucm517444ucm517445
The affected product and lot number can be identified as follows:

  • Product: 32 ounce Eyesaline Eyewash
  • Lot number:  F16091-61 (no other lot number is subject to recall)
  • The lot number can be found on the outside of the product case, shown at left, and on individual bottles, as shown on the right below.

Customers with questions regarding this recall can contact their distributor or Honeywell Customer Care at 1-800-430-5490, Monday – Friday, and 8:00 am – 6:30 pm EST.  Customers should contact their physician or healthcare provider if they have experienced any problems that may be related to taking or using this product.

Adverse reactions or quality problems experienced with the use of this product may be reported to the FDA’s MedWatch Adverse Event Reporting program either online, by regular mail or by fax.

Voluntary Recall of Fetch™ 2 Aspiration Catheter

MARLBOROUGH, Mass. – Boston Scientific (NYSE: BSX) has initiated a global, voluntary recall of all models of its Fetch™ 2 Aspiration Catheter, a thrombectomy catheter used during procedures to remove small blood clots from coronary arteries. The Fetch 2 catheters were recalled on March 22, 2016, due to complaints of shaft breakage. The U.S. Food and Drug Administration (FDA) classified the action as a Class 1 recall. This recall designation means that the use of the device exposes the patient to a reasonable chance of a serious adverse health consequence or death.

There have been no reports of patient injury or death, and there is no risk to patients who previously underwent a thrombectomy procedure with the Fetch 2 catheter. All reports of shaft breakage happened during the procedure, and the broken section was either removed while still partially attached to the catheter shaft or retrieved with a snare, without further patient complications. While unreported, the most severe potential outcome of this breakage is embolism of device fragments, which could lead to obstruction of blood flow or additional intervention to remove a device fragment surgically.

As part of the recall, all affected healthcare facilities were advised to discontinue use of all Fetch 2 catheters immediately and return unused product to Boston Scientific. Because Boston Scientific acquired the Fetch 2 catheter product line from Bayer Medical Care Inc., all recalled inventory is packaged and labeled as Bayer product. This device was manufactured between June 11, 2014 and February 19, 2016. There are currently 21,155 devices on the market subject to this recall.

Fetch 2 Catheter UPNs
FETCH2 US
109400-001
FETCH2 OUS
109400-002
FETCH2 Canada
109400-003
FETCH2 Japan
109400-004
FETCH2 EU
109400-005

Physicians and healthcare facilities can direct questions to their Boston Scientific representative or, call 1-800-811-3211. Adverse reactions or quality problems experienced with the use of this product may be reported to the FDA MedWatch Adverse Event Reporting program either online, by regular mail or by fax.

  • Complete and submit the report Online: www.fda.gov/medwatch/report.htm
  • Regular Mail or Fax: Download form www.fda.gov/MedWatch/getforms.htm or call 1-800-332-1088 to request a reporting form, then complete and return to the address on the pre-addressed form, or submit by fax to 1-800-FDA-0178
    or
  • Health care professionals and consumers may report serious adverse events or product quality problems with the use of this product to Boston Scientific by calling 1-800-811-3211 and to the FDA’s MedWatch Adverse Event Reporting program either online, by regular mail, fax or phone.

Vascular Solutions, Inc. Issues Recall of Guardian® II Hemostasis Valves

On March 3, 2016, Vascular Solutions, Inc. (Nasdaq: VASC), initiated a nationwide recall of Guardian II hemostasis valves used in catheterization procedures. Specific lots of the products have been recalled because they pose an increased risk of air leakage that may lead to an air embolism, which could result in serious injury or death. This recall only affects the Guardian II hemostasis valves and does not include the Guardian II NC hemostasis valves. No injuries have been reported in association with this issue to date.

Healthcare facilities that have the affected Guardian II hemostasis valves should remove the products from their inventory and return them to Vascular Solutions.

The recalled products were manufactured from March 2015 to February 2016 and distributed from April 2015 to February 2016.

The recalled products are specific lots of Model Numbers 8210 and 8211. A listing of the recalled lots is available from Vascular Solutions and has been provided to each facility that purchased the affected products. A total of 26,550 devices have been manufactured, with 5,283 distributed in the United States. The condition that led to the recall may affect approximately 2.4% of recalled devices.

Vascular Solutions Inc. voluntarily initiated the recall on March 3, 2016 through an Urgent Medical Device Recall notification distributed to purchasers of the affected products. The notification identified the specific lots subject to the recall and included instructions on how to return the affected products.

The U.S. Food and Drug Administration (FDA) classified this as a Class I recall. FDA defines Class I recalls as “a situation in which there is a reasonable probability that the use of, or exposure to, a violative product will cause serious adverse health consequences or death.

Consumers with questions may contact the company by phone at 1-888-240-6001 Monday through Friday, between the hours of 8:00 a.m. and 5:00 p.m. Central Time or by email at customerservice@vasc.com. Adverse reactions or quality problems experienced with the use of this product may be reported to the FDA’s MedWatch Adverse Event Reporting program:

For further information, connect to www.vasc.com.

Abbott’s Compounding Pharmacy Issues Voluntary Recall of All Lots of Unexpired Sterile Human and Animal Compounded Products Due to Lack of Sterility Assurance

Abbott’s Compounding Pharmacy is voluntarily recalling all unexpired lots of sterile compounded products due to concerns of lack of sterility assurance. All unexpired lots are subject to the recall. These include injectable medications, sterile solutions, eye drops, and eye ointments. All recalled products were distributed to patients, physician offices and clinics, and veterinarians within California.

All recalled products have a label that includes the Abbott’s Compounding Pharmacy name and expiration date. If unsure, Customers can call the pharmacy to determine the expiration date. This recall impacts all sterile products distributed between 01/01/2015 and 01/14/2016.

The recall was issued after a series of onsite inspections by the FDA. Out of an abundance of caution, Abbott’s Compounding Pharmacy is voluntarily recalling all sterile compounded products within expiry. If there is microbial contamination in products intended to be sterile, patients are at risk for serious and potentially life-threatening infections.

To date, Abbott’s Compounding Pharmacy has not received any reports of any adverse effects or injuries, and the recalled products were distributed exclusively within the state of California directly from its Berkeley, California pharmacy location.

Customers that have recalled product should immediately stop using it and contact the pharmacy to arrange for the return of unused product. Customers should contact their physician or health care provider if they have experienced any problems that may be related to taking or using these products.

Customers with questions regarding this recall can contact Abbott’s Compounding Pharmacy by phone Monday thru Friday, 9:00am to 5:00pm at (510) 548-8777, or email its media representative.

Adverse reactions or quality problems experienced with the use of this product may be reported to the FDA’s MedWatch Adverse Event Reporting program either online, by regular mail or by fax.

  1. Complete and submit the report Online: www.fda.gov/medwatch/report.htm
  2. Regular Mail or Fax: Download form www.fda.gov/MedWatch/getforms.htm or call 1-800-332-1088 to request a reporting form, then complete and return to the address on the pre-addressed form, or submit by fax to 1-800-FDA-0178
  3. For reporting animal adverse drug events: http://www.fda.gov/AnimalVeterinary/SafetyHealth/ReportaProblem/ucm055305.htm

Abbott’s Compounding Pharmacy deeply regrets any disruption that this voluntary recall and temporary suspension of Sterile compounding services have on its Customers, but notes that safety and quality are its primary concerns.

FDA Orders Recall under Consent Decree for all Custom Ultrasonics Automated Endoscope Reprocessors

The U.S. Food and Drug Administration today ordered Custom Ultrasonics to recall all of its automated endoscope reprocessors (AERs) from health care facilities due to the firm’s continued violations of federal law and a consent decree entered with the company in 2007. The identified violations could result in an increased risk of infection transmission. The FDA ordered this recall under the terms of the consent decree. The agency also issued a safety communication today recommending that health care facilities currently using Custom Ultrasonics AERs transition away from their use to alternative methods to reprocess flexible endoscopes as soon as possible.

These actions are part of the FDA’s commitment to patient safety and ongoing efforts to minimize the risk of patient infections associated with reprocessed endoscopes, including duodenoscopes and scope accessories. The FDA has been working with federal partners, manufacturers and other stakeholders to better understand the critical factors contributing to bacterial infections associated with duodenoscopes and how to best mitigate them.

An estimated 2,800 AERs manufactured by Custom Ultrasonics are currently in hospitals and outpatient clinics throughout the United States. The FDA’s recall order applies to all Custom Ultrasonics AERs, including the System 83 Plus, System 83 Plus 2 and System 83 Plus 9. Within seven business days after receiving the FDA’s recall order, Custom Ultrasonics must provide a written recall proposal to the FDA.

“We are taking action because Custom Ultrasonics failed to meet its legal and regulatory obligations,” said William Maisel, M.D., M.P.H., deputy director for science and chief scientist in the FDA’s Center for Devices and Radiological Health. “The FDA’s recall order stemmed from the company’s continued violations of federal law and the consent decree and is necessary to protect the public health.”

AERs are Class II medical devices that require 510(k) clearance and are used to wash and high-level disinfect endoscopes to decontaminate them between uses. AERs are designed to expose outside surfaces as well as interior channels of endoscopes to chemical solutions in order to kill microorganisms and prevent the spread of infection from these reusable medical devices. An endoscope must be thoroughly cleaned to remove any visible debris prior to placing it in an AER, which includes manually scrubbing the elevator mechanism and the recesses surrounding the elevator mechanism.
Continue reading